When it comes to the value of product quality and service, Nidec Minster Corporation has always let its customers do the talking. In more than a century of manufacturing, Minster has partnered with thousands of satisfied customers. Listed below are some of the many documented success stories.
The Latest - Testimonials
"We went with Minster because we knew that we would get dependable performance."
"The combination of durability and repeatability of our Minster presses is what sets them apart."
"Your product has to be absolutely right, and you need to produce more with the same number of people and machines. With the help of our Minster equipment, we'll continue to achieve that."
"The Minster/GPA transfer is a good design . . . it promised trouble-free operation, and, at the same time, provided us with the guarantee that we could run the speeds we wanted."
"Minster's combination of accuracy and dependability is what you might call an 'intangible asset'."
"When we buy a press, we intend to be running that machine for at least twenty years. From what I've seen of Minster presses, I don't foresee that being a problem."
"When we tried Minsters, though, we were never sorry. Their performance has been exceptional."
"The accuracy and dependability of a Minster press has been a big factor in our success."
"When we need a good press to make our stampings, we've got to have a Minster."
"When we buy a Minster, you get more than a press. You get an entire workforce that backs you up."
"Minster's willingness to work with us, that made the project a winner."
"Service is important to us, we knew Minster had a good reputation for service capability, and it proved true."
"We're sold on Minsters. The quality and durability keep us sold press after press."
"We believe that if you're going to buy a piece of equipment, you buy the best. We have no regrets."
The first Pulsar was producing parts at 900 strokes-per-minute. In less than four months, two more Pulsars were ordered.
"We have confidence in Minster. From experience we can appreciate the close tolerances in a Minster press."
"...reduced the lead-time of a typical part run from 10 days to 1 day - a 90% savings."
"The Pulsar is our choice for solid day-in, day-out production. . . It's a beautiful machine."
"Historically, we've averaged 276 strokes per minute on our older presses. We're nearly tripling that figure with our Pulsars."