Eccentric Gear | Two-point Mechanical Tie-Rod Presses | 2500 to 12,200 kN | 10-40 S.P.M.
The Se2 series consists of two-point eccentric geared presses, and are available from 250 to 1,200 metric tons capacity.
The eccentric geared design allows the use of longer stroke lengths than those available in a crankshaft press, and with a higher rating point above bottom dead center.
• Wintriss WPC2000 Smart PAC 2 clutch/brake and automation controls, including:
-- DieProPAC 8-channel die protection
-- ProCamPAC 8-output programmable limit switch
-- AutoSetPAC 4-channel tonnage monitor
• Fully stress-relieved fabricated steel frame
• Forged steel crankshaft
• Box slide with eight-point gibbing
• Hydraulic overload
• Monitored automatic recurculating oil lube system
• VFD-type speed control